If you have two JBL speakers and want to connect them together, there are a few different ways you can do it. The first way is to use an audio cable with a 3.5mm jack on each end. Plug one end of the cable into the “Audio Out” port on the back of the first speaker, then plug the other end into the “Audio In” port on the back of the second speaker.
This will allow sound to play from both speakers at once. Another way to connect two JBL speakers is by using Bluetooth. Make sure both speakers are turned on and in “Pairing” mode, then open up the Bluetooth settings on your phone or other device. Find each speaker in the list of available devices and select them both to pair them together. Once they’re paired, you should be able to play audio through both speakers at the same time.
- Connect one JBL speaker to the audio output of your device
- Connect a second JBL speaker to the first speaker using an audio cable
- Adjust the volume on both speakers until they are at the same level
How Do You Pair 2 JBL Speakers?
Assuming you would like a step-by-step guide on how to pair two JBL speakers:
1. Start with both speakers turned off.
2. Press and hold the Bluetooth button on one speaker until the LED indicator flashes blue rapidly. This indicates that the speaker is in pairing mode and ready to be connected to another device.
3a. On your mobile device, open the Bluetooth settings and make sure that Bluetooth is enabled.
3b. Once you have verified that Bluetooth is enabled on your mobile device, begin scanning for devices within range.
4a. Your JBL speaker should appear in the list of available devices as “JBL Speaker.” If it does not appear in the list, try restarting your mobile device or moving closer to the speaker.
4b. Once you have located “JBL Speaker” in the list of available devices, select it to initiate pairing between your mobile device and the speaker.
5a. You may be prompted to enter a PIN code on your mobile device during pairing; if so, enter four zeros (0000) when prompted and tap OK/Yes to confirm this code.
5b. If no PIN code is required, pairing will occur automatically after selecting “JBL Speaker” from the list of available devices (as long as both devices remain within range of each other).
How Do I Connect Two Speakers Together?
If you want to connect two speakers together, there are a few different ways that you can do it. The most common way is to use a speaker wire. You’ll need to find the positive and negative terminals on each speaker and then connect the wires accordingly.
Another way to connect two speakers is to use an audio cable with RCA connectors. Once again, you’ll need to find the positive and negative terminals on each speaker and connect the cables accordingly. Finally, if your speakers have Bluetooth capabilities, you can pair them together wirelessly.
What JBL Speakers Can Connect Together?
If you’re looking to create a surround sound system or just want to add some extra oomph to your music, you may be wondering if multiple JBL speakers can be connected together. The answer is yes! JBL speakers are designed to be easily connectable, so you can create the audio setup that’s perfect for your needs.
There are a few different ways to connect JBL speakers together. If you have two Bluetooth-enabled speakers, you can simply pair them wirelessly and enjoy your music with no cables required. If you have a speaker with an aux input and another with an aux output, you can use a standard 3.5mm audio cable to physically connect the two devices.
Finally, if your speakers both have USB ports, you can use a USB cable to establish a connection.
Once your speakers are connected, it’s time to start enjoying some great sound! Whether you’re watching a movie or listening to your favorite tunes, having multiple JBL speakers will give you an immersive experience that will make any audio event even more enjoyable.
How to connect two JBL Bluetooth speakers
How To Connect 2 JBL Speakers To iPhone
Are you looking to connect your JBL speakers to your iPhone? Whether you have the portable Bluetooth Flip 4 or 5, the Xtreme 2, or another model, here are a few easy ways to get great sound out of your JBL speaker system. JBL Connect App
If you have a newer model JBL speaker, it’s likely that it came with the JBL Connect app. This app allows you to wirelessly link multiple JBL-enabled speakers together so they can play the same audio source in perfect synchronization. In order to use this app, simply download it from the App Store and follow the on-screen instructions.
Once your speakers are linked together, open up the app and select “Link” in order to begin playing music through all of the connected devices. Bluetooth Connection If your JBL speaker doesn’t support the Connect app (or if you just prefer not to use it), don’t worry – you can still enjoy wireless streaming via Bluetooth connection.
Simply put your speaker into Bluetooth discovery mode by pressing and holding down the “Connect” button for a few seconds; once the light on top of the speaker starts blinking blue rapidly, head over to your iPhone’s Settings menu and select “Bluetooth.” Your phone should automatically detect any nearby Bluetooth devices; select your speaker from the list and wait for it to connect. Once it does, open up whatever audio source you want to use (iTunes, Spotify, Pandora, etc.) and start playing music – it should stream wirelessly through your connected speaker!
Wired Connection (via Auxiliary Cable) Of course, if neither of these wireless options appeals to you (or if they just don’t seem to be working), there’s always a good old-fashioned aux cord connection! To do this, simply plug one end of an auxiliary cable into your iPhone’s headphone jack and then plug the other end into either input on your JBL speaker; once both ends are firmly plugged in, press play on whatever audio source you want to use and adjust volume levels as necessary on both devices. And that’s all there is to it!
Frequently Asked Questions [FAQs]
How do I connect two JBL speakers wirelessly?
To connect two JBL speakers wirelessly, make sure both speakers are compatible with JBL Connect+ or PartyBoost technology. Turn on both speakers, activate the pairing mode, and use the JBL Connect app to link them.
Can I connect two JBL speakers with a cable?
Yes, you can connect two JBL speakers using an audio cable. Most JBL speakers have an AUX or stereo input. Use a 3.5mm stereo cable to connect the audio output of one speaker to the AUX input of the other.
Are there specific models that can’t be connected together?
Some JBL models might not be compatible for simultaneous pairing. Refer to the user manuals or the JBL website for information on which models can be connected together.
Can I connect JBL speakers to different devices simultaneously?
In general, JBL speakers can only be paired with one device at a time. If you want to switch devices, disconnect from the current device and pair it with the new one.
How do I set up a stereo pair with two JBL speakers?
To create a stereo pair, ensure both speakers are of the same model and have stereo pairing capabilities. Use the manufacturer’s app or follow the instructions in the manual to set up the stereo configuration.
What’s the difference between JBL Connect and PartyBoost?
JBL Connect and PartyBoost are different technologies used by JBL speakers for wireless connectivity. Check the compatibility of your speakers and use the corresponding app for the desired feature.
Conclusion
If you want to connect two JBL speakers together, there are a few different ways that you can do it. The first way is to use an audio cable with a 3.5mm jack on each end. You’ll need to plug one end of the cable into the “aux” port on each speaker.
Once both speakers are connected, you’ll be able to listen to your music or other audio through both speakers at the same time. Another way to connect two JBL speakers is by using Bluetooth. To do this, you’ll need to put each speaker into “pairing mode.”